HYJ-60H beam hydraulic straightening machine
|
| Main Application |
HYJ-60H beam hydraulic straightening machine Apply to the flange of the H-shaped steel plate thick correction, the scope of application, ability to work. Host floating around with a hydraulic roller, a feed side of the workpiece prior to the introduction into the host institution is to ensure that corrective work more smoothly. |
| Main technical parameters: |
| The total power tools |
31.9KW |
Power of maim dynamo |
22KW |
| The main round of pressure on the pressure |
1600KN |
Pressure of hydraulid system |
21Mpa |
| Pressure main round of the largest travel |
115mm |
Maximum torqure of gearbox |
25KN.M |
| Suitable size workpiece |
Width of flange plates |
250mm-800mm |
|
| Thickness of web plate |
350mm-1500mm |
|
| Thickness of flange plates |
15mm-60mm（Q253） |
|
| Thickness of web plate |
6mm-35mm |
|
|
|
